Acura Wiki

Super Handling-All Wheel Drive or SH-AWD is a full-time, fully automatic all-wheel drive traction and handling system designed and engineered by Honda Motor Company. The system was announced in April 2004, and first introduced in the North American market in the second generation 2005 model year Acura RL, and in Japan as the fourth generation Honda Legend.[1] The company describes SH-AWD as a system "... that provides cornering performance that responds faithfully to driver input, and outstanding vehicle stability. A world's first, the SH-AWD system combines front-rear torque distribution control with independently regulated torque distribution to the left and right rear wheels to freely distribute the optimum amount of torque to all four wheels in accordance with driving conditions."[1]

As first implemented in the Acura RL, SH-AWD allows torque to be continuously distributed between front and rear wheels from 70% front/30% rear to 30% front/70% rear, with up to 100% of the rear power being distributed to the outer left or right wheel to assist in cornering and dramatically reducing understeer. For example, in straight line full throttle acceleration, the RL is capable of distributing 40% of torque to the rear wheels and 60% to the front wheels.[2] In a hard turn, of percentage of power distributed to the rear wheels, up to 100% of the rear wheel power can be distributed to the single, outer rear wheel. This action will push the rear around the corner, and helping with steering, reducing understeer and keeping the car balanced and controlled[2]. The effect can be likened to steering in a row boat where applying more power to one oar can turn the boat.

The SH-AWD all-wheel drive system was lauded by Popular Science as one of the best automotive innovations of 2004, and as part of an already tech filled vehicle helped to earn the 2005 "Tech car of the year" from[3] All wheel drive systems for passenger cars, although common place today, have existed in the luxury car segment for quite some time. Audi's all wheel drive system quattro was introduced in 1980 on the Audi Quattro. Audi's parent company Volkswagen Group has been developing four-wheel drive systems almost since its inception during the Second World War.


The precursor to SH-AWD can be found in the 1997 Honda Prelude Active Torque Transfer System (ATTS).[4][5] The ATTS equipped front-wheel drive Honda Prelude was labeled Type SH - for "Super Handling". The ATTS was able to distribute torque across the front drive wheels in order to reduce understeer in cornering, and provide more neutral handling for the front-wheel driven car. The ATTS garnered high praise for the 5th and last generation of the Honda Prelude, and earned the Type SH Prelude the best handling car under $30,000 award from Car and Driver magazine. However, the real usefulness of this high technology differential, which came at a more than $2000 premium, was debatable in a car that was already well-known for its handling prowess[6]. The ATTS was only available in the highest trim level, manual transmission form, or about 5% of the Preludes offered for sale[7].

In the North American market, Honda introduced the original SH-AWD system introduced in late 2004 with the second generation 2005 Acura RL. Two other SH-AWD variants were introduced in late 2006 in the then all new 2007 Acura RDX[8] and the new second generation 2007 Acura MDX[9] Sport Utility Vehicles SUV. In late 2008, an improved version of the Acura RL SH-AWD was introduced in the significantly revised Mid-Model Change (MMC) of the 2009 Acura RL. This improved version provided earlier SH-AWD intervention (first gear vs second)[10] and more precise use of the rear differential electromagnetic clutch system to provide an improved limited-slip differential function.[10]

Yet another version of SH-AWD was introduced in late 2008 with the fourth generation 2009 Acura TL.[11] The Acura TL implementation of SH-AWD is actually mechanically more similar to the SH-AWD layout in the Acura MDX and RDX[12] in that the rear differential is over driven at a constant 1.7% faster than the front wheels[12], unlike the Acura RL, which, since its introduction in 2004[2][13], added an acceleration device[14] which can over drive the rear wheels up to 5.7% faster than the front wheels.

As of 2010 the Acura RL remains the only SH-AWD configuration with the variable speed rear differential acceleration device. The newly introduced 2010 Acura ZDX four-door sports coupe maintains a mechanically similar fixed 1.7% over driven rear differential configuration to the other Acura SH-AWD equipped vehicles

Acura announced in late 2008 that the 2010 Acura TL SH-AWD will be implemented with a six-speed manual transmission[15]. Previous implementations of SH-AWD have all been with five-speed automatic transmissions.

On July 20, 2009[16], Acura announced the Acura ZDX four-door sports coupe, equipped with a new six-speed automatic transmission and SH-AWD. This would be the first time a six-speed automatic transmission would be mated to SH-AWD, as well as being the first six-speed automatic transmission introduced in either the Acura or Honda line up.

One week later [17], Acura announced a similar six-speed automatic transmission and SH-AWD with the 2010 Mid Model Change (MMC) refresh for the second generation Acura MDX.

In December 2010, the 2011 Acura RL was announced [18] with a second Mid Model Change, featuring, among other things, a six-speed automatic tranmission.


Current SH-AWD configurations are all mated to a transverse engine, either a turbo-charged in-line four cylinder Honda K-Series engine in the case of the RDX, or naturally aspirated V-6 versions of the Honda J-Series engine. The engines are mated to a front wheel drive transaxle. There is no center differential. The transaxle is bolted to torque transfer unit that spins a center drive shaft that powers the rear differential unit. The rear differential is a T-shaped device. Power coming from the engine is transferred via a central hypoid gear that delivers power to each rear axle. Power to the each axle is modulated by identical planetary gear sets and electromagnetic clutch packs which can vary incoming power side to side[2]. Acura RL's exclusively contain a third planetary gear set and clutch pack that are packaged into a so called "Acceleration Device", which is bolted in front of one the rear differential unit[2].

As of early 2010, SH-AWD has been implemented by Acura in two functionally similar, but mechanically different configurations, with and without Acceleration Device. The more complex SH-AWD version uses the Acceleration Device[13] and can be found in:

2005–2008 Acura RL Sedan
2009–2010 Mid-Model Change Acura RL Sedan

The less complex version of SH-AWD omits the Acceleration Device[12][19][20][21] and can be found in:

2007-TBD Acura RDX CUV
2007-TBD Acura MDX SUV
2009-TBD Acura TL SH-AWD Sedan
2010-TBD Acura ZDX SH-AWD Four-Door Sports Coupe

The Acceleration Device allows the rear wheels to be variably overdriven with respect to the speed of the front wheels up to 5.7%.[13][19][20] The Acceleration Device in the Acura RL is positioned in front of the rear differential. During normal steady state driving, the Acceleration Device input shaft (from the engine) and output shaft (to the rear differential) spin at almost equal speeds. In a cornering situation, the output shaft spins up to 5.7% faster than the input shaft, effectively speeding up the rear wheels. The electromagnetic clutch packs, based on sensor inputs, will vary the torque sent to the rear differential from side to side providing constant and dynamic balancing of the car handling characteristics.[13]

The SH-AWD configuration with no acceleration device is simpler and overdrives the rear wheels at a constant 1.7% with respect to the speed of the front wheels[12][19][20].

The Acceleration Device was first introduced in the flagship Acura RL sedan, and continues in the MMC Acura RL sedan. This more complex configuration appears to be unique among the SH-AWD equipped Acuras. This more complex RL configuration could be considered an exclusive flagship vehicle feature, and not specified for vehicles with lower price points. The later SH-AWD configuration without the Acceleration Device could just be a simpler and less sophisticated version due to vehicle dynamics and price points, or it could represent a more refined, less complex and inherently more reliable, new standard SH-AWD configuration. The rationale for the two distinct configurations has not been publicized by Acura.

SH-AWD in the Acura RDX and Acura MDX use a default power split of 90% to the front and 10% to the rear. Like the unit in the RL, both can power the rear wheels with various amounts engine torque. The power split under straight-line, high-speed acceleration varies from vehicle to vehicle. In addition, in cornering situations, dependent on the specific vehicle balance and dynamics, the rearward power transfer ratios in the RDX and MDX differ greatly from the RL and TL sedans.

For example, in comparing the RL to the MDX, in hard cornering, the most power transferred to the rear wheels for the RL is 70%, whereas the MDX is only 50%. In straight line efficient cruising, different model years of the RL can transfer from 70 to 80% to the front wheels, while the MDX can transfer as much as 90% to the front wheels[20].

Systems integration[]

SH-AWD technology is deeply integrated with other systems and sensors implemented in Acura vehicles including:

3 or 4 channel (model dependent) Anti-lock Braking System (ABS)
4 channel Vehicle Stability Assist (VSA)
Electronic Brake Force Distribution (EBD)
Throttle control system
Yaw Angle Sensor
Speed sensor
Steering Angle sensor
Lateral G-Force sensor

These systems and sensors all work together to enhance vehicle handling, and safety.


Acura RL[10]

The second generation Acura RL sedan, introduced in late 2004 as a 2005 model, was the first production implementation of SH-AWD. It is the most mechanically complex, and probably the heaviest implementation of SH-AWD. The RL is powered by either a 3.5L 290 hp VTEC variable valve timing and lift V-6 (2005–2008) or a 3.7L 300 hp VTEC V-6 (2009–2010) transverse mounted in the manner of a typical Honda front wheel drive car. In fact, the RL uses a highly modified version of the Honda Global Midsize platform, versions of which exist for the Honda Accord, Acura TSX and Acura TL. However, the front transaxle is directly coupled to a torque transfer unit. Within the torque transfer unit is a short horizontal shaft and a hypoid gear set which turn the propeller shaft ninety degrees and moves it to the vehicle center line. An RL unique, two piece lightweight carbon fiber reinforced drive shaft carries power to the rear differential unit. Torque vectoring takes place in the rear differential which contains three planetary gear and clutch sets. Torque from the driveshaft passes through the differential's first clutch/planetary gearset, which as a unit is called the Acceleration Device. Two identical clutch/planetary gearsets power each rear wheel. The rear wheels are always overdriven with respect to the speed of the front wheels. The Acceleration Device can variably overdrive the rear wheel speed up to 5.7%.

2005–2008 RL SH-AWD operating parameters include:

  • During straight-line cruising and moderate cornering below about half throttle, up to 70 percent of the torque is delivered to the front wheels
  • In full-throttle straight line acceleration, up to 40 percent of the power is sent to the rear axle
  • In hard cornering, up to 70 percent of available torque goes to the rear wheels for enhanced chassis balance
  • Up to 100 percent of this torque can be applied to the outside rear wheel if the situation dictates
  • SH-AWD is active in second through fifth forward gears

The 2005 and 2006 system normally sends 70% of power to the front wheels and 30% to the rear under normal conditions but these ratios can reverse according to dynamic driving conditions. The 2007–2008 brochures specification sections indicate that this ratio changed to 80%-20%, and vice versa. The system can work because the clutches can slip under circumstances where the vehicle is turning, thus allowing the rear and front wheels to turn at different rates around a curve. As noted above, the SH-AWD can take 100% of the power shunted through the rear differentials and variably direct power to each wheel, up to 100% of that power to the outside rear wheel. Adding power to the outside rear wheel on a turn has a steering effect on the vehicle which can greatly improve vehicle handling dynamics through the reduction of oversteer and more balanced handling. In limited situations, the vehicle may exhibit power oversteer, characteristic of more sporty rear-wheel-drive vehicles.

While the rear differential also acts like a limited slip differential in spirited driving, SH-AWD is deeply integrated into the Honda Vehicle Stability Assist (VSA) system and various onboard sensors which helps to keep the car under control in a variety of situations.

The 2009 RL was updated to have more aggressive intervention of SH-AWD to give the car more rear wheel drive like handling characteristics. 2009 RL SH-AWD operating parameters include:

  • During straight-line cruising and moderate cornering below half throttle, up to 70-percent of engine torque is delivered to the front wheels.
  • In full-throttle straight line acceleration, up to 40-percent of the power is sent to the rear axle.
  • In hard cornering, up to 70-percent of available torque goes to the rear wheels for enhanced chassis balance. Up to 100-percent of this torque can be applied to the outside rear wheel that can also be overdriven up to 5.7-percent by a built-in acceleration device.
  • SH-AWD is active in all five forward gears

Acura RDX[22]
The Acura RDX was introduced in mid 2006 as a 2007 model year car. The first generation Acura RDX is a small crossover utility vehicle, and features a simpler implementation of SH-AWD than that found in the RL. The RDX does not have the Acceleration Device found in the Acura RL; instead the rear wheels are constantly overdriven at 1.7% higher speed than the front wheels. The RDX is distinguished by a unique 2.3L turbo charged 240 hp in line four cylinder VTEC engine mounted in what is purported to be a unique version of the Honda Global Small Light Truck Platform[23], a version different than the platform used for the Honda CR-V and the Honda Element. The engine is also transversely mounted.

SH-AWD operating parameters include:

  • Up to 90-percent of available driveline torque can be transferred to the front wheels during high-speed driving
  • During straight line full-throttle acceleration, up to 45-percent of available torque can be transferred to the rear wheels
  • In hard cornering during acceleration, up to 70-percent of available torque can be directed to the rear wheels for enhanced vehicle dynamics
  • Up to 100-percent of the torque sent to the rear axle can be applied to either rear wheel as the conditions dictate

Acura MDX[24]
The second generation Acura MDX, introduced in late 2006 as a 2007 model, uses a simpler implementation of SH-AWD than that found in the RL, the main difference is that unlike the RL 70 front 30 rear distribution, the MDX offers the opposite having a 30 front 70 rear distribution. The MDX configuration is similar to that in the RDX in that there is no Acceleration Device as found in the RL. The rear wheels are constantly overdriven at 1.7% faster speed than the front wheels. The MDX is powered by a 3.7L 300 hp VTEC V-6 engine tranversely mounted in a version of the Honda Global Large Light Truck Platform, versions of which are used for the Honda Pilot, Honda Ridgeline, Honda Odyssey, and the 2010 Acura ZDX. As can be seen below, the vehicle dynamics of the Acura MDX require different operating parameters.

SH-AWD operating parameters include:

  • Direct Yaw Control promotes precise line trace in all conditions
  • Full-time "active and intelligent" all-wheel drive requires no driver interaction
  • SH-AWD direct control electromagnetic clutches provide ultra-quick response
  • Grade logic control allows worry-free starting on steep grades with up to 70-percent of available torque being sent to the rear wheels
  • Up to 70-percent of available torque can be directed to the rear wheels during hill climb acceleration for maximum traction
  • Up to 50-percent of available torque can be transferred to the front wheels during cruising to help maximize fuel efficiency
  • In hard cornering, up to 50-percent of available torque can be directed to the rear axle for enhanced chassis balance and increased cornering capability
  • Up to 100-percent of the torque sent to the rear axle can be applied to either rear wheel as the traction conditions dictate
  • 37-percent increase in rear torque capacity as compared to the previous MDX VTM-4 system
  • 7-percent reduction in weight compared to the previous VTM-4 system

Acura TL[12]
The fourth generation Acura TL, introduced in late 2008 as a 2009 model has two major trim levels, a front wheel drive version, and an upmarket SH-AWD version. Similar in layout to the Acura RL, the Acura SH-AWD TL features a 3.7L 305 hp VTEC V-6, transversely mounted front engine in the Global Midsize Platform. The 2009 model uses a five speed automatic transmission, but Acura has also promised a new six-speed manual transmission for the 2010 model year. It remains to be seen if the 2010 model will also feature the newly announced six-speed automatic transmission featured in the prototype Acura ZDX announced at the April 2009 New York Auto Show. Unlike the Acura RL, the SH-AWD TL does not have the Acceleration Device.

SH-AWD operating parameters include:

  • Up to 90-percent of available torque can be transferred to the front wheels during normal cruising.
  • In hard cornering and under acceleration, up to 70-percent of available torque can be directed to the rear wheels to enhance vehicle dynamics.
  • Up to 100-percent of the torque sent to the rear axle can be applied to either rear wheel, depending on conditions.

Acura ZDX
The first generation Acura ZDX was announced on April 8, 2009 at the New York Auto Show as a 2010 model, slated for introduction in late Fall 2009[25] as an all new prototype concept car, billed as a luxury four door sports coupe. The Acura ZDX went on sale December 15, 2010[26]. The car is powered by an all-aluminum 3.7L 300 hp, 270 lbs-ft torque VTEC V-6, mated to an all-new 6-speed automatic transmission with Sequential SportShift and Super Handling All-Wheel Drive. The V-6 appears to be mechanically similar to the Acura MDX V-6[27]. The Acura ZDX SH-AWD implementation description[21] appears to be very similar to the Acura MDX SH-AWD implementation.

See also[]

  • 4Matic - a four-wheel drive system from Mercedes-Benz
  • Saab XWD - a four-wheel drive system from Saab
  • 4motion - a four-wheel drive system from Volkswagen
  • All-Trac - a four-wheel drive system from Toyota
  • ATTESA - a four-wheel drive system from Nissan
  • Quattro (four wheel drive system) - a four-wheel drive system from Audi
  • S-AWC - a torque vectoring all wheel drive system from Mitsubishi Motors[28]
  • Ricardo Cross-Axle Torque-Vectoring Audi[29]
  • ZF Vector Drive for BMW[29]


External links[]

See Also[]

image (between 170-190 pixels)

Honda Motor Company

Honda]| Acura | Li Nan | Honda Racing Corporation | Honda F1 Racing | Mugen



Canada: CSX · · · · · · · · ·

Mexico: · · · · · · · · ·

Hong Kong: · · · · · · · · ·

China: · · · · · · · · ·


EL · Integra · Legend · Vigor · CL · SLX · NSX · RSX




Advanced Sports Car · Advanced Sedan Concept · HSC · DN-X · ZDX Concept · · ·

Keihin · Showa Corporation · Nippon Seiki · List of Honda engines

Honda Corporate website A division of the Honda Motor Company